ZXTR2008Z document number: ds3623 2 rev. 1 - 2 1 of 7 www.diodes.com may 2013 ? diodes incorporated zxtr200 8 z a product line of diodes incorporated 100v input, 8v 30ma regulator transistor description the ZXTR2008Z monolithically integrates a transistor, zener diode and resistor to function as a high voltage linear regulator. the device regulates with a n 8.2v nominal output and delivers up to 30ma. it is designed for use in high voltage applications where standard l inear regulators cannot be used. this function is fully integrated into a single sot89 package, minimizing pcb area and reduc ing number of components when compared with a multi - chip discrete solution. applications supply v oltage regulation for the primary side controller in: ? networking ? telecom ? power over ethernet (poe) features ? series linear regulator using emitter - follower stage ? input voltage = 12v to 100v ? output voltage = 8.2v 10% ? continuous o utput c urrent u p to 30ma ? fully integrated into a single sot89 package ? totally lead - free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec - q101 standards for high reliability mechanical data ? case: sot89 ? case m aterial: molded plastic. ?green? molding compound. ? ul flammability rating 94v - 0 ? moisture sensitivity: level 1 per j - std - 020 ? terminals: finish - matte t in plated leads, solderable per mil - std - 202, method 208 ? weight: 0.052 grams (approximate) ordering information (n ote 4) product package marking reel size (inches) tape width (mm) quantity per reel zxtr200 8 z - 7 sot89 1 s4 7 12 1,000 zxtr200 8 z - 13 sot89 1 s4 13 12 2,500 notes: 1. no purposely added lead. fully eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporated?s definitions of halogen and antimony free,"green" and lead - free. 3. halogen and antimony free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm tot al br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http?//www.diodes.com/products/pac kages.htm l marking information pin name pin function v in input s upply gnd power g round v out voltage o utput 1 s 4 = product type marking code top view pin - out top view internal device schematic sot89
ZXTR2008Z document number: ds3623 2 rev. 1 - 2 2 of 7 www.diodes.com may 2013 ? diodes incorporated zxtr200 8 z a product line of diodes incorporated typical application circuit maximum ratings ( voltage relative to gnd, @t a = +25c, unless otherwise specified.) characteristic symbol value unit input v oltage v in 1 00 v input c urrent i in 30 ma continuous output c urrent i o ut 30 ma pulsed output current (note 7) i o m 500 ma (note 8) 150 thermal characteristics characteristic symbol value unit power dissipation (note 5 ) p d 1.7 w (note 6 ) 0.89 thermal resistance, junction to ambient (note 5 ) r ja 59 c /w (note 6 ) 1 12 thermal resistance, junction to lead (note 9 ) r jl 20 recommended operating junction temperature range t j - 40 to + 125 c maximum operating junction and storage temperature range t j , t stg - 65 to + 150 c esd ratings (note 10) characteristics symbols value unit jedec class electrostatic discharge ? human body model esd hbm 4000 v 3a electrostatic discharge ? machine model esd mm 300 v b notes: 5. for a device mounted on 50mm x 50mm 1oz copper that is on a single - sided fr4 pcb; device measured under still air conditions whilst operating in steady - state. 6. same as note 5, except mounted on 15mm x 15mm 1oz copper. 7. same as note 6, except measured with a single pulse width = 100s and v in =48v. 8. same as note 6, except measured with a single pulse width = 10ms and v in =48v. 9. thermal resistance from junction to solder - point (on the exposed collector pad). 10. refer to jedec specification jesd22 - a114 and jesd22 - a115 .
ZXTR2008Z document number: ds3623 2 rev. 1 - 2 3 of 7 www.diodes.com may 2013 ? diodes incorporated zxtr200 8 z a product line of diodes incorporated thermal characteris t i cs and derating information 10 20 30 40 50 60 70 80 90 100 0 5 10 15 20 25 30 35 40 t j = 125c = 150c steady state d.c. t a = 25c t j 125c 15mm x 15mm 1oz cu 50mm x 50mm 1oz cu safe operating area input voltage (v) load current (ma) 100 1m 10m 100m 1 10 100 1k 10k 0 10 20 30 40 50 60 50mm x 50mm 1oz cu 50mm x 50mm 1oz cu transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 50 single pulse t a = 25c t j 125c single pulse t a = 25c t j 125c pulse power dissipation pulse width (s) max power dissipation (w) 0 25 50 75 100 125 150 0.0 0.5 1.0 1.5 2.0 2.5 50mm x 50mm 1oz cu 15mm x 15mm 1oz cu derating curve ambient temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 10k 0 20 40 60 80 100 120 15mm x 15mm 1oz cu 15mm x 15mm 1oz cu transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 0.1 1 10 50 pulse power dissipation pulse width (s) max power dissipation (w)
ZXTR2008Z document number: ds3623 2 rev. 1 - 2 4 of 7 www.diodes.com may 2013 ? diodes incorporated zxtr200 8 z a product line of diodes incorporated electrical characteristics ( @t a = + 25c , unless otherwise specified .) characteristic symbol min typ max unit test condition output voltage v out 7. 38 8.2 9.02 v v in = 48v, i o ut = 30ma t j = + 25c line regulation (note 11) v out ? 10 3 00 mv v in = 1 2 to 72 v i o ut = 15ma, t j = + 25c temperature coefficient v out / t ? 10 ? mv/ c t j = - 40c to + 1 25c v in = 48v, i o ut = 15ma load regulation (note 1 2 ) v out ? - 180 - 3 00 mv i o ut = 1 to 30ma v in = 48v, t j = + 25c minimum v alue of i nput voltage required to maintain line r egulation v in(min) 1 2 ? ? v ? quiescent c urrent i q ? 275 650 500 900 a v in = 48v, i o ut = 10 a , t j = + 25c v in = 100 v, i o ut = 10 a , t j = + 25c power supply rejection ratio psrr ? 8 ? db c out = 100nf, i out = 30ma, v out = 8.2 v, v in = 10v,f = 100hz note s: 11. line regulation v out = v out (@ v in = 72v) ? v out(nominal) (@ v in = 1 2 v) 12. load regulation v out = v out (@ i out = 30 ma) ? v out(nominal ) (@ i out = 1 ma )
ZXTR2008Z document number: ds3623 2 rev. 1 - 2 5 of 7 www.diodes.com may 2013 ? diodes incorporated zxtr200 8 z a product line of diodes incorporated typical electrical characteristics (@ t a = +25c, unless otherwise specified.) -5 0 5 10 15 20 10 20 30 40 50 60 70 80 -4 -2 0 2 4 6 8 10 7.0 7.2 7.4 7.6 7.8 8.0 8.2 8.4 8.6 1 5 10 15 20 25 30 -1000 -750 -500 -250 0 250 500 750 1000 1250 12 20 30 40 50 60 70 80 90 100 -800 -400 0 400 800 1200 -40 -25 0 25 50 75 100 125 -1000 -800 -600 -400 -200 0 200 400 600 800 1000 1200 12 20 30 40 50 60 70 80 90 100 0 100 200 300 400 500 600 700 800 900 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 0 10 20 30 40 50 60 70 80 v in v in input voltage (v) v in =18 to 48v i out = 15ma slew rate=5v/ s c out = 100nf v out v out output voltage (v) line transient response v in input voltage (v) time (s) time (s) i out v out i out = 0 to 30ma slew rate=1a/ s c out = 100nf v in =18v i out output current (ma) load transient response t j = 125c ? v out output voltage (mv) ? v out output voltage (mv) temperature coefficient (note 15) t j = 25c t j = 85c load regulation (note 14) v in = 48v t j = -40c t j = 100c i out output current (ma) t j = 125c line regulation (note 13) ? v out output voltage (mv) v in input voltage (v) t j = 100c t j = 85c t j = 25c t j = -40c i out = 15ma i out = 15ma v in = 48v junction temperature (c) t j = 125c t j = 100c t j = 85c t j = 25c t j = -40c i out = 10a quiescent current i q quiescent current ( a) note s: 13. line regulation v out = v out ? v out(nominal) (@ v in = 1 2 v , i out = 1 5 ma , t j = 25 c ) 14. load regulation v out = v out ? v out(nominal ) (@ v in = 48v , i out = 1ma , t j = 25c ) 15. temperature coefficient v out = v out ? v out(nominal ) (@ v in = 48v , i out = 1 5 ma , t j = 25c )
ZXTR2008Z document number: ds3623 2 rev. 1 - 2 6 of 7 www.diodes.com may 2013 ? diodes incorporated zxtr200 8 z a product line of diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. sot89 dim min max a 1.40 1.60 b 0.44 0.62 b1 0.35 0.54 c 0.35 0.44 d 4.40 4.60 d1 1.62 1.83 e 2.29 2.60 e 1.50 typ h 3.94 4.25 h1 2.63 2.93 l 0.89 1.20 all dimensions in mm dimensions value (in mm) x 0.900 x1 1.733 x2 0.416 y 1.300 y1 4.600 y2 1.475 y3 0.950 y4 1.125 c 1.500 e h d1 b1 b e c l a d 8 (4x) h 1 r 0 . 2 0 0 y1 x1 y2 y c x (3x) y3 y4 x2 (2x)
ZXTR2008Z document number: ds3623 2 rev. 1 - 2 7 of 7 www.diodes.com may 2013 ? diodes incorporated zxtr200 8 z a product line of diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. diodes incorporated does not assume any lia bility arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this document or pro ducts described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorpora ted does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales chann el. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall i ndemnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized ap plication. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign trademarks. th is document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiven ess. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related re quirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 2013 , diodes incorporated www.diodes.com
|
